feat(audio): move to pipewire

config/hosts/imxyy-nix-server/nixos.nix

@@ -13,15 +13,14 @@
     timeout = 0;
   };
 
-  hardware.bluetooth.enable = true;
-  hardware.bluetooth.powerOnBoot = true;
-
   systemd.services.nix-daemon = {
     environment.TMPDIR = "/var/cache/nix";
     serviceConfig.CacheDirectory = "nix";
   };
   environment.variables.NIX_REMOTE = "daemon";
 
+  my.audio.enable = false;
+
   sops.secrets.imxyy-nix-server-hashed-password = {
     sopsFile = secrets.imxyy-nix-server-hashed-password;
     format = "binary";

config/hosts/imxyy-nix-x16/home.nix

@@ -29,8 +29,7 @@
 
       wineWowPackages.waylandFull
 
-      pavucontrol
+      pwvucontrol
-      pamixer
     ];
     programs.zsh = {
       sessionVariables = {
@@ -135,7 +134,6 @@
         ".config/Kingsoft"
         ".config/dconf"
         ".config/gh"
-        ".config/pulse"
         ".config/pip"
         ".config/libreoffice"
         ".config/sunshine"

config/hosts/imxyy-nix-x16/nixos.nix

@@ -35,36 +35,6 @@
   };
   environment.variables.NIX_REMOTE = "daemon";
 
-  security.rtkit.enable = true;
-  services.pipewire = {
-    enable = true;
-    alsa.enable = false;
-    alsa.support32Bit = false;
-    pulse.enable = false;
-    audio.enable = false;
-  };
-  services.pulseaudio = {
-    enable = true;
-    support32Bit = true;
-    package = pkgs.pulseaudioFull;
-    extraConfig = ''
-      load-module module-switch-on-connect
-      unload-module module-suspend-on-idle
-    '';
-  };
-  hardware.bluetooth = {
-    enable = true;
-    powerOnBoot = true;
-    settings = {
-      General = {
-        Enable = "Source,Sink,Media,Socket";
-        Disable = "HeadSet";
-        MultiProfile = "multiple";
-      };
-    };
-  };
-  users.extraUsers.${username}.extraGroups = [ "audio" ];
-
   fonts = {
     enableDefaultPackages = false;
     fontDir.enable = true;

config/hosts/imxyy-nix/home.nix

@@ -30,8 +30,7 @@
 
       wineWowPackages.waylandFull
 
-      pavucontrol
+      pwvucontrol
-      pamixer
     ];
     programs.zsh = {
       shellAliases = {
@@ -173,7 +172,6 @@
         ".config/Kingsoft"
         ".config/dconf"
         ".config/gh"
-        ".config/pulse"
         ".config/pip"
         ".config/libreoffice"
         ".config/sunshine"

config/hosts/imxyy-nix/nixos.nix

@@ -73,36 +73,6 @@ in
   };
   environment.variables.NIX_REMOTE = "daemon";
 
-  security.rtkit.enable = true;
-  services.pipewire = {
-    enable = true;
-    alsa.enable = false;
-    alsa.support32Bit = false;
-    pulse.enable = false;
-    audio.enable = false;
-  };
-  services.pulseaudio = {
-    enable = true;
-    support32Bit = true;
-    package = pkgs.pulseaudioFull;
-    extraConfig = ''
-      load-module module-switch-on-connect
-      unload-module module-suspend-on-idle
-    '';
-  };
-  hardware.bluetooth = {
-    enable = true;
-    powerOnBoot = true;
-    settings = {
-      General = {
-        Enable = "Source,Sink,Media,Socket";
-        Disable = "HeadSet";
-        MultiProfile = "multiple";
-      };
-    };
-  };
-  users.extraUsers.${username}.extraGroups = [ "audio" ];
-
   fonts = {
     enableDefaultPackages = false;
     fontDir.enable = true;

modules/audio.nix

@@ -0,0 +1,24 @@
+{
+  config,
+  lib,
+  username,
+  ...
+}:
+lib.my.makeSwitch {
+  inherit config;
+  default = true;
+  optionName = "default audio settings";
+  optionPath = [ "audio" ];
+  config' = {
+    security.rtkit.enable = true;
+    services.pipewire = {
+      enable = true;
+      alsa.enable = true;
+      alsa.support32Bit = true;
+      pulse.enable = true;
+      audio.enable = true;
+    };
+    users.extraUsers.${username}.extraGroups = [ "audio" ];
+    my.persist.homeDirs = [ ".local/state/wireplumber" ];
+  };
+}

modules/bluetooth.nix

@@ -0,0 +1,20 @@
+{ config, lib, ... }:
+lib.my.makeSwitch {
+  inherit config;
+  default = true;
+  optionName = "default bluetooth settings";
+  optionPath = [ "bluetooth" ];
+  config' = {
+    hardware.bluetooth = {
+      enable = true;
+      powerOnBoot = true;
+      settings = {
+        General = {
+          Enable = "Source,Sink,Media,Socket";
+          Disable = "HeadSet";
+          MultiProfile = "multiple";
+        };
+      };
+    };
+  };
+}

modules/cli/media/all.nix

@@ -9,7 +9,6 @@ lib.my.makeSwitch {
   ];
   config' = {
     my.cli.media = {
-      cava.enable = true;
       go-musicfox.enable = true;
       mpd.enable = true;
       ffmpeg.enable = true;

modules/cli/media/cava/config/config

@@ -1,167 +0,0 @@
-## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
-
-
-[general]
-
-# Smoothing mode. Can be 'normal', 'scientific' or 'waves'.
-mode = normal
-
-# Accepts only non-negative values.
-framerate = 60
-
-# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
-# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens.
-; autosens = 1
-; overshoot = 20
-
-# Manual sensitivity in %. Autosens must be turned off for this to take effect.
-# 200 means double height. Accepts only non-negative values.
-; sensitivity = 100
-
-# The number of bars (0-200). 0 sets it to auto (fill up console).
-# Bars' width and space between bars in number of characters.
-bars = 0
-bar_width = 5
-bar_spacing = 1
-
-# Lower and higher cutoff frequencies for lowest and highest bars
-# the bandwidth of the visualizer.
-# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
-# Cava will automatically increase the higher cutoff if a too low band is specified.
-; lower_cutoff_freq = 50
-; higher_cutoff_freq = 10000
-
-
-
-[input]
-
-# Audio capturing method. Possible methods are: 'pulse', 'alsa' or 'fifo'.
-# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
-#
-# All input methods uses the same config variable 'source'
-# to define where it should get the audio.
-#
-# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
-# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
-#
-# For alsa 'source' will be the capture device.
-# For fifo 'source' will be the path to fifo-file.
-method = pulse
-source = auto
-
-; method = alsa
-; source = hw:Loopback,1
-
-; method = fifo
-; source = /tmp/mpd.fifo
-
-
-
-[output]
-
-# Ouput method. Can be 'ncurses', 'noncurses' or 'raw'.
-# 'noncurses' is for systems that does not suport ncurses.
-# 'raw' is a 16 bit data stream of the bar heights that can be used to send to other applications.
-# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
-method = ncurses
-
-# Visual styles. Can be 'stereo' or 'mono'.
-# 'stereo' mirrors both channels with low frequencies in center.
-# 'mono' averages both channels and outputs left to right lowest to highest frequencies.
-style = mono
-
-# Raw output target. A fifo will be created if target does not exist.
-; raw_target = /dev/stdout
-
-# Raw data format. Can be 'binary' or 'ascii'.
-; data_format = binary
-
-# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
-; bit_format = 16bit
-
-# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
-; ascii_max_range = 1000
-
-# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
-# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
-; bar_delimiter = 59
-; frame_delimiter = 10
-
-
-
-# [color]
-
-# # Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
-# # Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires a
-# # terminal that can change color definitions such as Gnome-terminal or rxvt.
-# ; background = black
-# ; foreground = cyan
-
-# # Gradient mode, only hex defined colors are supported, background must also be defined in hex
-# # or remain commented out. 1 = on, 0 = off. Warning: for certain terminal emulators cava will
-# # not able to restore color definitions on exit, simply restart your terminal to restore colors.
-# gradient = 1
-# gradient_color_1 = '#0099ff'
-# gradient_color_2 = '#ff3399'
-
-
-
-[smoothing]
-
-# Multiplier for the integral smoothing calculations. Takes values from 0-0.99.
-# Higher values means smoother, but less precise. Set to 0 to disable.
-; integral = 0.7
-
-# Disables or enables the so-called "Monstercat smoothing". Set to 0 to disable.
-; monstercat = 1
-; waves = 1
-
-# Set gravity multiplier for "drop off". Higher values means bars will drop faster.
-# Accepts only non-negative values. 0.5 means half gravity, 2 means double. Set to 0 to disable "drop off".
-; gravity = 2
-
-
-# In bar height, bars that would have been lower that this will not be drawn.
-; ignore = 0
-
-
-[eq]
-
-# This one is tricky. You can have as much keys as you want.
-# Remember to uncomment more then one key! More keys = more precision.
-# Look at readme.md on github for further explanations and examples.
-#; 1 = 1 # bass
-#; 2 = 1
-#; 3 = 1 # midtone
-#; 4 = 1
-#; 5 = 1 # treble
-1=1
-2=1
-3=2
-4=1
-5=1
-
-[color]
-
-#background = '#191724'
-gradient = 1
-gradient_count = 6
-gradient_color_1 = '#31748f'
-gradient_color_2 = '#9ccfd8'
-gradient_color_3 = '#c4a7e7'
-gradient_color_4 = '#ebbcba'
-gradient_color_5 = '#f6c177'
-gradient_color_6 = '#eb6f92'
-
-[color]
-
-gradient = 1
-
-gradient_color_1 = '#94e2d5'
-gradient_color_2 = '#89dceb'
-gradient_color_3 = '#74c7ec'
-gradient_color_4 = '#89b4fa'
-gradient_color_5 = '#cba6f7'
-gradient_color_6 = '#f5c2e7'
-gradient_color_7 = '#eba0ac'
-gradient_color_8 = '#f38ba8'

modules/cli/media/cava/config/config-applet

@@ -1,167 +0,0 @@
-## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
-
-
-[general]
-
-# Smoothing mode. Can be 'normal', 'scientific' or 'waves'.
-mode = normal
-
-# Accepts only non-negative values.
-framerate = 60
-
-# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
-# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens.
-; autosens = 1
-; overshoot = 20
-
-# Manual sensitivity in %. Autosens must be turned off for this to take effect.
-# 200 means double height. Accepts only non-negative values.
-; sensitivity = 100
-
-# The number of bars (0-200). 0 sets it to auto (fill up console).
-# Bars' width and space between bars in number of characters.
-bars = 0
-bar_width = 2
-bar_spacing = 1
-
-# Lower and higher cutoff frequencies for lowest and highest bars
-# the bandwidth of the visualizer.
-# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
-# Cava will automatically increase the higher cutoff if a too low band is specified.
-; lower_cutoff_freq = 50
-; higher_cutoff_freq = 10000
-
-
-
-[input]
-
-# Audio capturing method. Possible methods are: 'pulse', 'alsa' or 'fifo'.
-# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
-#
-# All input methods uses the same config variable 'source'
-# to define where it should get the audio.
-#
-# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
-# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
-#
-# For alsa 'source' will be the capture device.
-# For fifo 'source' will be the path to fifo-file.
-method = pulse
-source = auto
-
-; method = alsa
-; source = hw:Loopback,1
-
-; method = fifo
-; source = /tmp/mpd.fifo
-
-
-
-[output]
-
-# Ouput method. Can be 'ncurses', 'noncurses' or 'raw'.
-# 'noncurses' is for systems that does not suport ncurses.
-# 'raw' is a 16 bit data stream of the bar heights that can be used to send to other applications.
-# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
-method = ncurses
-
-# Visual styles. Can be 'stereo' or 'mono'.
-# 'stereo' mirrors both channels with low frequencies in center.
-# 'mono' averages both channels and outputs left to right lowest to highest frequencies.
-style = mono
-
-# Raw output target. A fifo will be created if target does not exist.
-; raw_target = /dev/stdout
-
-# Raw data format. Can be 'binary' or 'ascii'.
-; data_format = binary
-
-# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
-; bit_format = 16bit
-
-# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
-; ascii_max_range = 1000
-
-# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
-# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
-; bar_delimiter = 59
-; frame_delimiter = 10
-
-
-
-# [color]
-
-# # Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
-# # Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires a
-# # terminal that can change color definitions such as Gnome-terminal or rxvt.
-# ; background = black
-# ; foreground = cyan
-
-# # Gradient mode, only hex defined colors are supported, background must also be defined in hex
-# # or remain commented out. 1 = on, 0 = off. Warning: for certain terminal emulators cava will
-# # not able to restore color definitions on exit, simply restart your terminal to restore colors.
-# gradient = 1
-# gradient_color_1 = '#0099ff'
-# gradient_color_2 = '#ff3399'
-
-
-
-[smoothing]
-
-# Multiplier for the integral smoothing calculations. Takes values from 0-0.99.
-# Higher values means smoother, but less precise. Set to 0 to disable.
-; integral = 0.7
-
-# Disables or enables the so-called "Monstercat smoothing". Set to 0 to disable.
-; monstercat = 1
-; waves = 1
-
-# Set gravity multiplier for "drop off". Higher values means bars will drop faster.
-# Accepts only non-negative values. 0.5 means half gravity, 2 means double. Set to 0 to disable "drop off".
-; gravity = 1
-
-
-# In bar height, bars that would have been lower that this will not be drawn.
-; ignore = 0
-
-
-[eq]
-
-# This one is tricky. You can have as much keys as you want.
-# Remember to uncomment more then one key! More keys = more precision.
-# Look at readme.md on github for further explanations and examples.
-#; 1 = 1 # bass
-#; 2 = 1
-#; 3 = 1 # midtone
-#; 4 = 1
-#; 5 = 1 # treble
-1=1
-2=1
-3=2
-4=1
-5=1
-
-[color]
-
-#background = '#191724'
-gradient = 1
-gradient_count = 6
-gradient_color_1 = '#31748f'
-gradient_color_2 = '#9ccfd8'
-gradient_color_3 = '#c4a7e7'
-gradient_color_4 = '#ebbcba'
-gradient_color_5 = '#f6c177'
-gradient_color_6 = '#eb6f92'
-
-[color]
-
-gradient = 1
-
-gradient_color_1 = '#94e2d5'
-gradient_color_2 = '#89dceb'
-gradient_color_3 = '#74c7ec'
-gradient_color_4 = '#89b4fa'
-gradient_color_5 = '#cba6f7'
-gradient_color_6 = '#f5c2e7'
-gradient_color_7 = '#eba0ac'
-gradient_color_8 = '#f38ba8'

modules/cli/media/cava/config/shaders/bar_spectrum.frag

@@ -1,79 +0,0 @@
-#version 330
-
-in vec2 fragCoord;
-out vec4 fragColor;
-
-// bar values. defaults to left channels first (low to high), then right (high to low).
-uniform float bars[512];
-
-uniform int bars_count;    // number of bars (left + right) (configurable)
-uniform int bar_width;    // bar width (configurable), not used here
-uniform int bar_spacing;    // space bewteen bars (configurable)
-
-uniform vec3 u_resolution; // window resolution
-
-//colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
-uniform vec3 bg_color; // background color
-uniform vec3 fg_color; // foreground color
-
-uniform int gradient_count;
-uniform vec3 gradient_colors[8]; // gradient colors
-
-vec3 normalize_C(float y,vec3 col_1, vec3 col_2, float y_min, float y_max)
-{
-    //create color based on fraction of this color and next color
-    float yr = (y - y_min) / (y_max - y_min);
-    return col_1 * (1.0 - yr) + col_2 * yr;
-}
-
-void main()
-{
-    // find which bar to use based on where we are on the x axis
-    float x = u_resolution.x * fragCoord.x;
-    int bar = int(bars_count * fragCoord.x);
-
-    //calculate a bar size
-    float bar_size = u_resolution.x / bars_count;
-
-    //the y coordinate and bar values are the same
-    float y =  bars[bar];
-
-    // make sure there is a thin line at bottom
-    if (y * u_resolution.y < 1.0)
-    {
-      y = 1.0 / u_resolution.y;
-    }
-
-    //draw the bar up to current height
-    if (y > fragCoord.y)
-    {
-        //make some space between bars basen on settings
-        if (x > (bar + 1) * (bar_size) - bar_spacing)
-        {
-            fragColor = vec4(bg_color,1.0);
-        }
-        else
-        {
-            if (gradient_count == 0)
-            {
-                fragColor = vec4(fg_color,1.0);
-            }
-            else
-            {
-                //find which color in the configured gradient we are at
-                int color = int((gradient_count - 1) * fragCoord.y);
-
-                //find where on y this and next color is supposed to be
-                float y_min = color / (gradient_count - 1.0);
-                float y_max = (color + 1.0) / (gradient_count - 1.0);
-
-                //make color
-                fragColor = vec4(normalize_C(fragCoord.y, gradient_colors[color], gradient_colors[color + 1], y_min, y_max), 1.0);
-            }
-        }
-    }
-    else
-    {
-        fragColor = vec4(bg_color,1.0);
-    }
-}

modules/cli/media/cava/config/shaders/normalized_bars.frag

@@ -1,38 +0,0 @@
-#version 330
-
-in vec2 fragCoord;
-out vec4 fragColor;
-
-// bar values. defaults to left channels first (low to high), then right (high to low).
-uniform float bars[512];
-
-uniform int bars_count;    // number of bars (left + right) (configurable)
-
-uniform vec3 u_resolution; // window resolution, not used here
-
-//colors, configurable in cava config file
-uniform vec3 bg_color; // background color(r,g,b) (0.0 - 1.0), not used here
-uniform vec3 fg_color; // foreground color, not used here
-
-float normalize_C(float x, float x_min, float x_max, float r_min, float r_max )
-{
-	float xr;
-	xr = (r_max-r_min) * (x - x_min) / (x_max - x_min) + r_min;
-	return xr;
-}
-
-void main()
-{
-    // find which bar to use based on where we are on the x axis
-    int bar = int(bars_count * fragCoord.x);
-
-    // create a normal along the y axis based on the bar height
-    float x = normalize_C(fragCoord.y, 1.0, 0.0, 0.0, bars[bar]);
-
-    // set color
-    fragColor.r=fg_color.x*x;
-    fragColor.g=fg_color.y*x;
-    fragColor.b=fg_color.z*x;
-    fragColor.a=1.0;
-
-}

modules/cli/media/cava/config/shaders/northern_lights.frag

@@ -1,34 +0,0 @@
-#version 330
-
-in vec2 fragCoord;
-out vec4 fragColor;
-
-// bar values. defaults to left channels first (low to high), then right (high to low).
-uniform float bars[512];
-
-uniform int bars_count;    // number of bars (left + right) (configurable)
-
-uniform vec3 u_resolution; // window resolution, not used here
-
-//colors, configurable in cava config file
-uniform vec3 bg_color; // background color(r,g,b) (0.0 - 1.0), not used here
-uniform vec3 fg_color; // foreground color, not used here
-
-void main()
-{
-    // find which bar to use based on where we are on the x axis
-    int bar = int(bars_count * fragCoord.x);
-
-    float bar_y = 1.0 - abs((fragCoord.y - 0.5)) * 2.0;
-    float y = (bars[bar]) * bar_y;
-
-    float bar_x = (fragCoord.x - float(bar) / float(bars_count)) * bars_count;
-    float bar_r = 1.0 - abs((bar_x - 0.5)) * 2;
-
-    bar_r = bar_r * bar_r * 2;
-
-    // set color
-    fragColor.r = fg_color.x * y * bar_r;
-    fragColor.g = fg_color.y * y * bar_r;
-    fragColor.b = fg_color.z * y * bar_r;
-}

modules/cli/media/cava/config/shaders/pass_through.vert

@@ -1,14 +0,0 @@
-#version 330
-
-
-// Input vertex data, different for all executions of this shader.
-layout(location = 0) in vec3 vertexPosition_modelspace;
-
-// Output data ; will be interpolated for each fragment.
-out vec2 fragCoord;
-
-void main()
-{
-    gl_Position =  vec4(vertexPosition_modelspace,1);
-    fragCoord  = (vertexPosition_modelspace.xy+vec2(1,1))/2.0;
-}

modules/cli/media/cava/default.nix

@@ -1,22 +0,0 @@
-{
-  config,
-  lib,
-  pkgs,
-  ...
-}:
-lib.my.makeHomePackageConfig {
-  inherit config pkgs;
-  packageName = "cava";
-  packagePath = [ "cava" ];
-  optionPath = [
-    "cli"
-    "media"
-    "cava"
-  ];
-  extraConfig = {
-    my.home.xdg.configFile."cava" = {
-      source = ./config;
-      recursive = true;
-    };
-  };
-}

modules/cli/media/mpd/mpd.conf

@@ -23,8 +23,3 @@ audio_output {
     type        "pipewire"
     name        "pipewire"
 }
-
-audio_output {
-    type        "pulse"
-    name        "pulseaudio"
-}

modules/desktop/wm/niri/config.nix

@@ -151,17 +151,19 @@
           "XF86AudioRaiseVolume" = {
             allow-when-locked = true;
             action.spawn = [
-              "pamixer"
+              "wpctl"
-              "-i"
+              "set-volume"
-              "2"
+              "@DEFAULT_SINK@"
+              "2%+"
             ];
           };
           "XF86AudioLowerVolume" = {
             allow-when-locked = true;
             action.spawn = [
-              "pamixer"
+              "wpctl"
-              "-d"
+              "set-volume"
-              "2"
+              "@DEFAULT_SINK@"
+              "2%-"
             ];
           };
           "XF86AudioMute" = {

modules/desktop/wm/niri/waybar/config.nix

@@ -19,8 +19,8 @@ _: {
   modules-right = [
     "custom/notification"
     "tray"
-    "pulseaudio"
+    "wireplumber"
-    "pulseaudio#microphone"
+    "wireplumber#source"
   ];
 
   "niri/workspaces" = {
@@ -73,7 +73,6 @@ _: {
       stopped = "";
     };
     tooltip = false;
-    toottip-format = "{status_icon} Musicfox {artist} - {album} - {title}";
     on-scroll-up = "playerctl -p musicfox volume 0.05+";
     on-scroll-down = "playerctl -p musicfox volume 0.05-";
   };
@@ -81,14 +80,12 @@ _: {
     format = " {:%H:%M   %m.%d}";
     tooltip = false;
   };
-  pulseaudio = {
+  wireplumber = {
     format = "{icon} {volume}%";
     tooltip = false;
     format-muted = "󰟎 Muted";
-    on-click = "pamixer -t";
+    on-click = "wpctl set-mute @DEFAULT_SINK@ toggle";
-    on-click-middle = "pavucontrol & disown";
+    on-click-middle = "pwvucontrol";
-    on-scroll-up = "pamixer -i 5";
-    on-scroll-down = "pamixer -d 5";
     scroll-step = 5;
     format-icons = {
       headphone = "󰋋";
@@ -104,14 +101,13 @@ _: {
       ];
     };
   };
-  "pulseaudio#microphone" = {
+  "wireplumber#source" = {
-    format = "{format_source}";
+    node-type = "Audio/Source";
+    format = "󰍬 {volume}%";
     tooltip = false;
-    format-source = "󰍬 {volume}%";
+    format-muted = "󰍬 Muted";
-    format-source-muted = "󰍭 Muted";
+    on-click = "wpctl set-mute @DEFAULT_SOURCE@ toggle";
-    on-click = "pamixer --default-source -t";
+    on-click-middle = "pwvucontrol";
-    on-scroll-up = "pamixer --default-source -i 5";
-    on-scroll-down = "pamixer --default-source -d 5";
     scroll-step = 5;
   };
 }

modules/desktop/wm/niri/waybar/style.css

@@ -100,7 +100,7 @@ tooltip * {
 #window,
 #clock,
 #battery,
-#pulseaudio,
+#wireplumber,
 #network,
 #workspaces,
 #taskbar,
@@ -219,13 +219,13 @@ window#waybar.empty #window {
     border-right: 0;
 }
 
-#pulseaudio {
+#wireplumber {
     color: #89b4fa;
     border-right: 0px;
     border-radius: 10px 0px 0px 10px;
 }
 
-#pulseaudio.microphone {
+#wireplumber.source {
     color: #cba6f7;
     margin-right: 5px;
     border-left: 0px;
@@ -238,10 +238,3 @@ window#waybar.empty #window {
     margin-right: 10px;
     border-left: 0px;
 }
-
-#custom-weather {
-    border-radius: 0px 10px 10px 0px;
-    border-left: 0;
-    border-right: 0;
-    margin-left: 0px;
-}